Alstom Transport France – Reims Tramway (2010): Engineering and Design of the “Traction Power Substations” Automation System

ES PROCESSING performed the study, design, engineering and commissioning of the entire system including Automation PLC/HMI, Emergency tripping system, Interlock/Intertrip system, Calculation sheet… The project consisted of designing, engineering and commissioning of the ‘traction power substations’ automation system. Reims line has 7 traction power substations (including...

07 July, 2010

Holcim Lebanon (2009): Migration of the entire KILN 7 DCS from CEMAT V4 to PCS7/CEMAT V7.1 ‘Crusher, Raw Mill, Kiln Feed, Kiln Cooler, Coal Mill, Utility, Power Plant’

ES PROCESSING performed the migration of the Kiln DCS by removing the S5 PLCs and I/O and implementing six new PLCs S7416-3 that communicate with 2 new Redundant Servers, an Engineering Station, 5 Operator Stations, an M.I.S. Station and an OPEN PCS7 Station. The new...

25 July, 2009

Alstom Transport France – Dubai Tramway (2009): Engineering and Design of the “Traction Power Substations” and “Lighting Power Substations” Automation System

ES PROCESSING carried out the study, design and engineering of the entire system including Automation PLC/HMI, Emergency tripping system, Interlock/Intertrip system, Calculation sheet… The project consisted of engineering and designing the Automation system for the “traction & lighting power substations” to ensure control of all of...

11 May, 2009

Holcim New Caledonia (2009): Automation & Process control of the “Fly Ash Turbo Separator” with DCS PCS7/CEMAT V6

Turnkey project performed by ES PROCESSING involved the implementation of a new Digital Control System PCS7/CEMAT V6.1 consisting of one Cemat Single Station , a Cemat Engineering Station and one S7 CPU417 PLC “FLY ASH Turbo Separator” communicating over an Industrial Ethernet IE network. The...

15 April, 2009

Holcim Madagascar – Ibity (2008) – DCS PCS7/CEMAT Design, Engineering & Commissioning

A turnkey project performed by ES PROCESSING studying, designing, engineering and implementing of a new DCS process control PCS7/CEMAT V6.1 composed of two Cemat Single Station’ a Cemat Engineering Station, three PLC’s S7400 of the ‘Packing Plant’ the ‘Cement Mill’ and the new ‘Crusher’. The...

15 November, 2008

Alstom Transport France – Tunis “Métro Léger” Tramway (2008): Revamping and Extending of the “traction power substations” SCADA

ES PROCESSING realized the study, design, engineering and commissioning of the entire system which includes Automation PLC/HMI, Emergency tripping system, Interlock/Intertrip system, Calculation sheet… The project consisted of revamping and extending the automation system for the “traction power substations”, including : 25 substations equipped with GE...

15 September, 2008

Alstom Transport France – Alger Tramway, Algeria (2008): Engineering and Design of the “Traction Power Substations” Automation System

ES PROCESSING conducted the study, design and engineering of the entire system, including Automation PLC/HMI, Emergency tripping system, Interlock/Intertrip system, Calculation sheets. The project consisted of engineering and designing of the automation system of the traction power substations of the Alger Tramway. The Alger line comprises...

15 July, 2008

Siemens Karlsruhe Germany – Song Loulou Hydroelectric Power Station Cameroun (2008): Automation in S7/ WinCC of the Hydroelectric Power Station and Hydraulic DAM of Songloulou Plant

This revamping project involved data acquisition, control of the Hydraulic valves and dampers, Calculation and PID control of DAM levels and flow, short-term and long-term archiving, curves and trend controls, message/Alarm processing, calculation and regulation, diagnostics and automated report generation....

07 July, 2008

Siemens France – Georgia Pacific Hondouville (2008): Revamping of the “Cotton Bleaching Line” DCS to STEP7/WINCC

This project consisted of Data acquisition, automation functionalities for both continuous and batch processes, high performance short-term and long-term archiving, curves and trend controls, full control of the entire installation and equipment, high performance message/Alarm processing, calculation and regulation, recipes and batch system management, full...

15 March, 2008

Siemens Karlsruhe Germany – Jijel Power Plant Algeria (2007): Revamping of the Power Plant Monitoring System to PCS7

This project involved data acquisition, short-term and long-term archiving, curves and trends controls, messages/alarms processing, full redundancy functionalities, diagnostics and asset management functionality and automatic production report generation. All the development was engineered using the PCS7 ‘POWER’ Library....

15 May, 2007

Siemens Karlsruhe Germany – Marsat Power Plant Algeria (2007): Revamping to STEP7/WINCC of “Group 4 & 5” data acquisition and monitoring system

This project involved data acquisition, short-term and long-term archiving, curves and trends controls, messages/alarms processing, diagnostics and asset management....

19 February, 2007